Honda CR 125 1993

Parts for Honda CR 125 1993 motocross bike

Here you can see all the spare parts and accessories available for Honda CR 125 1993

If you are not sure if your bike is of this model and year, please check that your chassis number is comprised between:  JE015400001   and this one: JE015499999  (If there is an asterisk you can change it by any number or letter ).

IMPORTANT: If you are sure of the year of your motorcycle but do not match the indicated chassis number, please contact our technicians.

SH93125-SE Pro Circuit 304 Silencer SH93125-SE
Available
Honda CR 125 1993

Pro Circuit 304 Silencer SH93125-SE

Pro-Circuit
SH93125-SE
€174.72
With a clear and stylish design, the 304 Silencer will make a lasting impression. The slightly longer body offers reduced noise output when compared to the R-304. Its perfectly constructed lightweight cylindrical canister, combined with the brushed aluminum body and stainless steel inlet tube and end cap, give you a silencer that looks as good as it...
SH93125-RE Pro Circuit R-304 Silencer Shorty SH93125-RE
Available
Honda CR 125 1993

Pro Circuit R-304 Silencer Shorty SH93125-RE

Pro-Circuit
SH93125-RE
€174.72
The R-304 Shorty silencer was developed as a full-race two-stroke silencer and was designed to increase power over stock exhaust. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used to secure the inlet cap and can be removed easily for quick...
1119312K Pro Circuit R-304 Silencer Ti-2 Honda 1119312K
Available
Honda CR 125 1993

Pro Circuit R-304 Silencer Ti-2 Honda 1119312K

Pro-Circuit
1119312K
€406.85
The R-304 Shorty silencer was developed as a full-race two-stroke silencer and was designed to increase power over stock exhaust. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used to secure the inlet cap and can be removed easily for quick...
M-21-603H/21121143 Stator Honda CR 125/250
Available
Honda CR 125 1993

Stator Honda CR 125/250

MooseRacing
M-21-603H
€145.14
ElectroSport uses high quality lamination cores to replace the pressed steel clamshell design that is used on the OEM stator. This new core is wound with the highest quality copper winding wire. The temperature rating of these windings is much higher than the OEM stator offers which increases reliability dramatically.
M8801/ 688-8800 Moose Racing Kill Switch M8801
Available
Honda CR 125 1993

Moose Racing Kill Switch M8801

MooseRacing
688-8800
€20.51
Stop Button as original, equal origen connectors, so you can change without any poblem.
M5591028 Moose Racing Clutch Lever "SHORTY" Honda M5591028
Available
Honda CR 125 1993

Moose Racing Clutch Lever "SHORTY" Honda M5591028

ASV
M5591028/LEC11SB
€12.04
Pivot lever M-type comes with forged lever arm. Lever is specially designed for motocross, ED and off road racing. Lever to fold outward to prevent breaking in the event of a crash. Automatic lever position restoration provides quick recovery from the crash.
2140E+1124E copy of Blackbird Graphic Kit Dream 3 Honda 2140E
Available
Honda CR 125 1993

copy of Blackbird Graphic Kit Dream 3 Honda 2140E

Blackbird
2140E+1124E
€115.82
Adhesives for motocross and enduro are made with materials highly efficient and optimum quality. It has a thickness of 0.5 mm, is strong and stands the test of time.The impression is of type uses resistant inks screen and brilliant. The kit includes: radiators cover, front and rear fenders and fork protectors.
2140E Blackbird Graphic Kit Dream 3 Honda 2140E
Available
Honda CR 125 1993

Blackbird Graphic Kit Dream 3 Honda 2140E

Blackbird
2140E
€69.49
Adhesives for motocross and enduro are made with materials highly efficient and optimum quality. It has a thickness of 0.5 mm, is strong and stands the test of time.The impression is of type uses resistant inks screen and brilliant. The kit includes: radiators cover, front and rear fenders and fork protectors.
02-0247 Motion Pro Throttle Cable for Honda +4 Motion Pro 02-0247
Available
Honda CR 125 1993

Motion Pro Throttle Cable for Honda +4 Motion Pro 02-0247

Motion Pro
02-0247
€13.55
Motion Pro Throttle Cable Standard black vinyl coil-wound housing Meet or exceed OEM quality Inner nylon sleeve for longer life and smooth operation Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel
19.G1287 PROX Clutch Cover Gasket Honda 19.G1287
Available
Honda CR 125 1993

PROX Clutch Cover Gasket Honda 19.G1287

ProX
19.G1287
€7.49
Clutch Cover Gasket Complementary gaskets to complete ProX clutch componentsMade from high-quality material for ultimate sealing
02-0058 Motion Pro Clutch Cable for Honda CR 125 02-0058
Available
Honda CR 125 1993

Motion Pro Clutch Cable for Honda CR 125 02-0058

Motion Pro
02-0058
€14.11
OEM-style cables are available in a wide variety of applications for most popular models. Cables are nylon lined and use precise OEM component dimensions. Terminal clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel.
SDP-815MX Rear Brake pads Sintered DP SDP-815MX
Available
Honda CR 125 1993

Rear Brake pads Sintered DP SDP-815MX

DP Brakes
SDP-815MX
€24.95
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
SDP814MX Front Brake pads Sintered DP SDP814MX
Available
Honda CR 125 1993

Front Brake pads Sintered DP SDP814MX

DP Brakes
SDP814MX
€24.95
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
DP815 Rear Brake pads Sintered DP DP815
Available
Honda CR 125 1993

Rear Brake pads Sintered DP DP815

DP Brakes
DP815
€23.09
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
17110298/110295 Moto Master Brake Disc Front Flamed Honda 17110298
Available
Honda CR 125 1993

Moto Master Brake Disc Front Flamed Honda 17110298

Moto-Master
17110298/110295
€91.96
Brake disc Offroad Flame      FRAME FRONT BRAKE DISCS FLAME     Flame brake discs are manufactured to the most stringent tolerances and specifications using a specially hardened premium quality stainless steel.     The material guarantees extremely low wear of
MP02-058 Motion Pro Clutch Cable for Honda MP02-058
Available
Honda CR 125 1993

Motion Pro Clutch Cable for Honda MP02-058

Motion Pro
MP02-058
€14.11
OEM-style cables are available in a wide variety of applications for most popular models. Cables are nylon lined and use precise OEM component dimensions. Terminal clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel.
17200231/M107-ORG Rear Brake pads Sintered Moose Racing 17200231
Available
Honda CR 125 1993

Rear Brake pads Sintered Moose Racing 17200231

MooseRacing
M107-ORG
€19.30
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
M107-S47 Rear Brake pads Sintered Moose Racing XCR M107-S47
Available
Honda CR 125 1993

Rear Brake pads Sintered Moose Racing XCR M107-S47

MooseRacing
M107-S47
€36.24
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
07.RC520120XCG Pro X Chain 520 X-Ring 07.RC520120XCG gold
Available
Honda CR 125 1993

Pro X Chain 520 X-Ring 07.RC520120XCG gold

ProX
07.RC520120XCG
€98.00
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120XC Pro X Chain 520 X-Ring 07.RC520120XC
Available
Honda CR 125 1993

Pro X Chain 520 X-Ring 07.RC520120XC

ProX
07.RC520120XC
€96.07
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120CG Pro X Chain 520 MX 07.RC520120CG gold
Available
Honda CR 125 1993

Pro X Chain 520 MX 07.RC520120CG gold

ProX
07.RC520120CG
€75.26
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120C Pro X Chain 520 MX 07.RC520120C
Available
Honda CR 125 1993

Pro X Chain 520 MX 07.RC520120C

ProX
07.RC520120C
€73.79
Transmission chains 520 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
6200233 Moto Master Rear Sprocket 520 6200233 red
Available
Honda CR 125 1993

Moto Master Rear Sprocket 520 6200233 red

Moto-Master
6200233
€69.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200232 Moto Master Rear Sprocket 520 6200232
Available
Honda CR 125 1993

Moto Master Rear Sprocket 520 6200232

Moto-Master
6200232
€69.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200223 Moto Master Rear Sprocket 520 6200223 red
Available
Honda CR 125 1993

Moto Master Rear Sprocket 520 6200223 red

Moto-Master
6200223
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200222 Moto Master Rear Sprocket 520 6200222
Available
Honda CR 125 1993

Moto Master Rear Sprocket 520 6200222

Moto-Master
6200222
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200211 Moto Master Rear Sprocket 520 6200211
Available
Honda CR 125 1993

Moto Master Rear Sprocket 520 6200211

Moto-Master
6200211
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
112150/17111004 Moto Master Brake Disc Front Honda 112150
Available
Honda CR 125 1993

Moto Master Brake Disc Front Honda 112150

Moto-Master
112150/17111004
€183.07
Moto-Master quality standards. Made from specially hardened premium quality  stainless steel, NITRO discs allow for high performance braking while exhibiting extremely little wear. Venting slots are integrated in to the disc design to help aid with cooling and cleaning of the brake pad contact surface. For best performance we recommend using...
112082/17110780 Moto Master Brake Disc Front Honda 112082
Available
Honda CR 125 1993

Moto Master Brake Disc Front Honda 112082

Moto-Master
112082/17110780
€140.36
Moto-Master quality standards. Made from specially hardened premium quality  stainless steel, NITRO discs allow for high performance braking while exhibiting extremely little wear. Venting slots are integrated in to the disc design to help aid with cooling and cleaning of the brake pad contact surface. For best performance we recommend using...
UFO Complete Body Kit Honda HOKIT096
Available
Honda CR 125 1993

UFO Complete Body Kit Honda HOKIT096

UFO
HOKIT096@999
€156.21
UFO Complete Body Kit Motocross Enduro Leave your bike like new, with a set of high-quality plastics, as expected from UFO Plast.In the same way, without loss of colors such as original plastic of your bike and available in several colors.
Polisport rear shock protector Honda 8905000
  • Reduced price / -€0.01
Available
Honda CR 125 1993

Polisport rear shock protector Honda 8905000

Polisport
8905000
€15.60 €15.61
Polisport Rear Shock Mud plate Replacement plastic from PolisportPieces are already drilled and can be mounted easily to stock locations
Moose Racing Carburetor Repair Kit Honda CR 125 1990 - 1995
  • Reduced price / -€7.03
Available
Honda CR 125 1993

Moose Racing Carburetor Repair Kit Honda CR 125 1990 - 1995

MooseRacing
26-1544
€29.21 €36.24
Moose Racing Carb Repair Kit Complete kits to rebuild OEM carburetors mxtotal.com Each kit contains all necessary gaskets, O-rings, float valve and jets Supplied to Moose Racing by the same supplier the OEMs use GENERIC PHOTO
Apico Brake Lever AP-LEB11B black
Available
Honda CR 125 1993

Apico Brake Lever AP-LEB11B black

Apico
AP-LEB11B
€17.55
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall.
Apico Cluth Lever AP-LEC11LB long black
Available
Honda CR 125 1993

Apico Cluth Lever AP-LEC11LB long black

Apico
AP-LEC11LB
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Cluth Lever AP-LEC11SB Short black
Available
Honda CR 125 1993

Apico Cluth Lever AP-LEC11SB Short black

Apico
AP-LEC11SB
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Cluth Lever AP-LEC11S Short
Available
Honda CR 125 1993

Apico Cluth Lever AP-LEC11S Short

Apico
AP-LEC11S
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Clutch Cable Honda CR 125
  • Reduced price / -€3.15
Available
Honda CR 125 1993

Apico Clutch Cable Honda CR 125

Apico
45-2008/06521679
€17.32 €20.46
Apico Clutch Cable - OEM-style cables are available in a wide variety of applications for most popular models - Cables are nylon lined and use precise OEM component dimensions - Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch...
EBC Brake Disc Moto Cross Front Honda MD6001CX
  • Reduced price / -€7.76
Available
Honda CR 125 1993

EBC Brake Disc Moto Cross Front Honda MD6001CX

EBC Brakes
MD6001CX
€69.77 €77.52
A new ultra lightweight performance brake rotor to provide superb visual appeal for riders wishing to replace or upgrade their original brake rotors. The new Vee-Notch™ design offers a self cleaning high pressure contact pad-to-rotor brake enhancement.
NGK Iridium Spark Plug BR8EIX
  • Reduced price / -€9.21
Available
Honda CR 125 1993

NGK Iridium Spark Plug BR8EIX

NGK
BR8EIX
€15.90 €25.11
NGK Iridium IX Spark PlugDelivering performance, durability and anti-fouling capability, NGK spark plugs use an iridium design to give your engine the absolute best.
All Balls Upper Shock Bearing Seal Kit Honda 29-1006
  • Reduced price / -€1.50
Available
Honda CR 125 1993

All Balls Upper Shock Bearing Seal Kit Honda 29-1006

All Balls
A29-1006
€23.61 €25.11
Rear Shock Bearing Kit Complete kits for rebuilding often neglected shock areas and includes lower shock bushings or bearings Kits feature parts made from OEM grade materials All components included - saves time and money over OEM Packaged for exact fit and trouble-free installation *Note: Image is f
Moose Racing Steel Folding Shift Lever Honda CR / CRF
  • Reduced price / -€2.71
Available
Honda CR 125 1993

Moose Racing Steel Folding Shift Lever Honda CR / CRF

MooseRacing
D07-1370B
€42.53 €45.24
STEEL FOLDING SHIFT LEVERS Folding tips prevent snagging on brush or rocks Steel levers withstand impacts and bends without breaking mxtotal.com Strong and grippy polyurethane tip cover Hardened splines won't slip or rotate
Moose Racing steel / aluminium rear sprocket Honda
  • Reduced price / -€3.32
Available
Honda CR 125 1993

Moose Racing steel / aluminium rear sprocket Honda

MooseRacing
1210146
€51.99 €55.31
MOOSE RACING DUAL SPROCKETS Designed to outlast standard aluminum rear sprockets and is much lighter than steel rear sprockets mxtotal.com Inner ring is made from 100% German aluminum using ISO 7075-T6 aluminum and the outer ring is made from heavy duty steel Self-cleaning mud grooves between each tooth to prevent dirt build up Inne
Moose Racing Water Pump Repair Kit Honda CR 125 1990-04
  • Reduced price / -€2.80
Available
Honda CR 125 1993

Moose Racing Water Pump Repair Kit Honda CR 125 1990-04

MooseRacing
821243
€43.71 €46.50
WATER PUMP REPAIR KITS Includes every gasket, o-ring, bearing and seal required to rebuild a water pump mxtotal.com Typical kits include the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located
VForce 3 Replacement Reed Petals 3P602H
  • Reduced price / -€6.06
Available
Honda CR 125 1993

VForce 3 Replacement Reed Petals 3P602H

V-Force
10080077/3P602H
€74.40 €80.47
Are you checking your reed petals for signs of normal wear? You should be. A reed petal is a wear item, and as such should be checked regularly for signs of wear and fraying. mxtotal.com A reed petal is opening and closing 144 times per second at 8,000 RPM, so it's understandable reeds can wear. If wear and/or fraying is visible, it's time to replace your...
All Balls Linkage Bearing Kit Honda 27-1054
  • Reduced price / -€6.26
Available
Honda CR 125 1993

All Balls Linkage Bearing Kit Honda 27-1054

All Balls
AB27-1054/34161
€98.11 €104.36
All Balls Linkage Bearing Kits features:  One kit does it all. All of the bearings, seals, shafts, bushings, thrust bearings (if required) in one all inclusive kit in order to do the job correctly and completely
UFO Front Number Plate Honda HO02629
  • Reduced price / -€1.05
Available
Honda CR 125 1993

UFO Front Number Plate Honda HO02629

UFO
HO02629
€45.02 €46.08
UFO MX Front Number Plate Replacement front number plate from UFO Plastic is color-matched to stock or in optional works colors Pieces are already drilled and can be mounted easily to stock locations Made in Italy
D.I.D 520 MX Super Roller Chain 116 L
  • Reduced price / -€6.12
Available
Honda CR 125 1993

D.I.D 520 MX Super Roller Chain 116 L

D.I.D.
1148035116
€95.89 €102.02
D.I.D. 520MX Gold Chain Gold and black plates D.I.D. is the #1 chain manufacturer in the world Solid rollers Shot-peened parts High cylindrical and roundness accuracy Exacting tolerances provide low friction Pre-stretched Extended riveted bushing "Anti-Kink" design Special alloy stee
Vicma Clutch disc separators Honda CR 125 1986-99 / Husqvarna
  • Reduced price / -€0.96
Available
Made of stainless Not aluminum. Like other clutch disks drive mxtotal.comWeight gain separators on adds fly wheel effect. Helps Boot and traction.Not fadeor extending, As the plates aluminum.Life300% more already that the spacers are not aluminum.Sold in sets.  
Moose Racing Competition lever sets Honda 44-51075
  • Reduced price / -€1.29
Available
Honda CR 125 1993

Moose Racing Competition lever sets Honda 44-51075

MooseRacing
53175-ML3-790SH
€20.22 €21.51
Shorty Style Power Lever Set Alloy levers allow two-finger control of the brake and clutch Set includes brake and clutch short power levers Each lever set is poly bagged and labeled for easy identification Levers only; perch not included
All Balls Throttle Cable for Honda CR 125 1993-99 / CR250
  • Reduced price / -€1.16
Available
€18.28 €19.44
Clutch and Throttle Cable assmeblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM mold
All Balls Clutch Cable Honda CR125 1987-97 + 2000-03
  • Reduced price / -€1.16
Available
Honda CR 125 1993

All Balls Clutch Cable Honda CR125 1987-97 + 2000-03

All Balls
45-2008
€18.28 €19.44
Clutch Cable assemblie Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded compo
Stator Honda CR 125 1992-95 / CR 250 1989-91 ( OEM #:
  • Reduced price / -€9.72
Available
€152.31 €162.03
ElectroSport uses high quality lamination cores to replace the pressed steel clamshell design that is used on the OEM stator. This new core is wound with the highest quality copper winding wire. The temperature rating of these windings is much higher than the OEM stator offers which increases reliability dramatically.
Apico Rep Throttle Sleeve AP-THR3
  • Reduced price / -€0.30
Available
Honda CR 125 1993

Apico Rep Throttle Sleeve AP-THR3

Apico
AP-THR3
€12.83 €13.13
Replace OEM throttle sleeves mxtotal.com Heavier duty and exceed the quality and durability of OEM sleeves Will not scar bars like aluminum sleeves Nylon fabric composite material Pop-out end caps for use with bar-end-type handguards, unless noted Molded ridges to help secure grips One-piece tube and reel design
Apico Throttle Cable Honda CR 125 - 250 1984-02 / CR 500 1984-01
  • Reduced price / -€6.70
Available
€16.34 €23.04
Apico Clutch Cable - OEM-style cables are available in a wide variety of applications for most popular models - Cables are nylon lined and use precise OEM component dimensions - Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch...
Apico Shift Lever Red Honda CR 125 1987-07
  • Reduced price / -€7.26
Available
Honda CR 125 1993

Apico Shift Lever Red Honda CR 125 1987-07

Apico
AP-GPF100R
€29.74 €37.00
These forged aluminium gear pedals are designed to be extremely strong and durable, they feature sprung loaded, knurled tips, forged arms and quality hardware. The natural satin finish will keep them looking good whatever conditions you throw at them.
All Balls wheel spacers Rear Honda CR 125/250 1988-94 / CR 500
  • Reduced price / -€2.63
Available
€41.20 €43.83
All Balls Racing Wheel Spacers are a long life spacer that features a light weight black anodized 6061-T6 aluminum body with a zinc plated, hardened steel shell for durability. Aluminum body is vehicle specific so be sure to reference the photo when purchasing
All Balls wheel spacers Front Honda CR 125/250/500 1992-94
  • Reduced price / -€1.66
Available
Honda CR 125 1993

All Balls wheel spacers Front Honda CR 125/250/500 1992-94

All Balls
11-1002/02220045
€26.00 €27.66
All Balls Racing Wheel Spacers are a long life spacer that features a light weight black anodized 6061-T6 aluminum body with a zinc plated, hardened steel shell for durability. Aluminum body is vehicle specific so be sure to reference the photo when purchasing
ProX Crankshaft Bearing & Seal Kits Honda CR 125 1986-07
  • Reduced price / -€7.19
Available
€39.46 €46.65
ProX Crankshaft Bearing & Seal Kits offer you reliability and carefree driving. The sets contain all parts you need for rebuilding your crankshaft and can be used in combination with all other ProX or OEM crankshaft related products. Next to the high quality ProX connecting rod kits the Crankshaft Bearing & Seal Kits are completing the crankshaft...
All Balls Caliper Repair Kit Rear 18-3028
  • Reduced price / -€1.57
Available
Honda CR 125 1993

All Balls Caliper Repair Kit Rear 18-3028

All Balls
AB18-3028
€24.73 €26.31
BRAKE CALIPER REBUILD KIT: Each kit includes all necessary rubber components and brake pins if it’s applicable Made by Nissin, an OEM manufacturer in Japan Applications cover most popular models
Vertex Piston Kit Honda CR 125 1992-99
  • Reduced price / -€7.56
Available
Honda CR 125 1993

Vertex Piston Kit Honda CR 125 1992-99

Vertex
09102175/22189
€118.42 €125.99
1 Piston Ring Vertex Piston Kit Restore that crisp clean power that your dirtbike or quad use to have with a new Piston Kit from Vertex. Or step up the power with a high compression Piston Kit, All kits are standard compression unless noted. All pistons are heat-treated with a T-5 hardening and tempering c
EBC Brake Front pads Sintered FA125R
  • Reduced price / -€2.32
Available
Honda CR 125 1993

EBC Brake Front pads Sintered FA125R

EBC Brakes
FA125R
€26.47 €28.80
For maximum durability, EBC presents its tablets from the "R" series high density. Material copper based sintered manufactured in our own facilities in the U.S., the "R" series brake pads for ATV motocross and has become a reference in the market of non-original spare parts, offering long life , high resistance to contamination by mud, water, sand, dust,...
EBC Rear Brake Pads Sintered Brake Pads FA131R
  • Reduced price / -€2.34
Available
Honda CR 125 1993

EBC Rear Brake Pads Sintered Brake Pads FA131R

EBC Brakes
FA131R
€26.46 €28.80
For maximum durability, EBC presents its tablets from the "R" series high density. Material copper based sintered manufactured in our own facilities in the U.S., the "R" series brake pads for ATV motocross and has become a reference in the market of non-original spare parts, offering long life , high resistance to contamination by mud, water, sand, dust,...
Boyesen Clutch cover for Honda CR 125 1987-99
  • Reduced price / -€16.37
Available
Honda CR 125 1993

Boyesen Clutch cover for Honda CR 125 1987-99

Boyesen
CC01B
€126.11 €142.48
Set your ride apart from the rest with the ultimate look in race performance Lightweight factory clutch covers provide years of outstanding protection; guaranteed not to warp Individually surfaced for a perfect, leak-free fit Super-tough, powder-coated finish resists weathering and wear and tear Asbestos-free gasket is bound with nitrile for tight
Zeta Oil Filler Plug ZE89-2110 Red
  • Reduced price / -€0.65
There are not enough products in stock
Honda CR 125 1993

Zeta Oil Filler Plug ZE89-2110 Red

Zeta Racing
ZE89-2110
€10.02 €10.67
- CNC machined oil filler cap. - Includes safety wire holes. - Available in anodized colors of red, blue, and orange for KTM. - Laser printed ZETA logo.
Apico Titanium Flexi Brake & Clutch Lever Honda AP-FLEXIHON1RD
  • Reduced price / -€9.08
Available
€81.68 €90.75
Apico Forged Brake & Clutch Flexi Pivot Lever Set Apico Factory Forged parts are designed, tested and manufactured for the serious competitor.Using years of racing and engineering experience Apico have blended quality designs, superior materials and precision manufacturing processes to create factory racing parts available toeveryone.Flexi Pivot Lever...
Spark Plug Cap
  • Reduced price / -€1.25
Available
Honda CR 125 1993

Spark Plug Cap

Vicma
259/VMA
€2.48 €3.73
Spark Plug Cap - NGK spark plug resistor covers used with resistor spark plugs are the best combination against radio frequency interference - Protect aging engines from cutting out in wet conditions - For use with 7mm-diameter plug wires - Sold each
Spark Plug Cap Red
  • Reduced price / -€0.74
Available
Honda CR 125 1993

Spark Plug Cap Red

Vicma
260/VMA
€2.99 €3.73
Spark Plug Cap - NGK spark plug resistor covers used with resistor spark plugs are the best combination against radio frequency interference - Protect aging engines from cutting out in wet conditions - For use with 7mm-diameter plug wires - Sold each
JT Aluminium Rear Sprocket JTA210
  • Reduced price / -€2.76
Available
Honda CR 125 1993

JT Aluminium Rear Sprocket JTA210

JT Racing
JTA210
€43.23 €45.99
 Made from advanced aviation-grade 7075-T6 aluminium alloy, optimal lightweight design and CNC machined for performance and lifespan! All aluminium MX rear racing sprockets are manufactured from the best materials with a special self-cleaning design, and hand-finished to perfection.
Moto Master Rear Brake Pads 091811
  • Reduced price / -€7.78
Available
Honda CR 125 1993

Moto Master Rear Brake Pads 091811

Moto-Master
17211264/091811
€14.56 €22.34
ProX sintered metal brake pads! The ProX brake pads are produced under a very strict sintering process. In this sintering process metalic particles are fused together in combination with heat and pressure.
RK 520 Super Roller Chain FO520MXZ4 118-L Red
  • Reduced price / -€6.33
Available
Honda CR 125 1993

RK 520 Super Roller Chain FO520MXZ4 118-L Red

RK Racing Chain
99480118
€99.21 €105.54
All feature heavier side plates for more strength and resistance to stretch MXZ racing chains are made for the serious motocross racer with all components heat treated for high-performance durability; chromoly steel construction with seamless rollers and bushings, and oversized alloy pins for added strength
Moose Racing Brake Caliper Pistons Rear Honda
  • Reduced price / -€1.19
Available
Honda CR 125 1993

Moose Racing Brake Caliper Pistons Rear Honda

MooseRacing
08-931
€18.63 €19.82
BRAKE CALIPER PISTONS: Pistons for replacing the brake caliper Includes required quantities Made by Nissin, the OEM manufacturer in Japan
Electric Regulator 18236
  • Reduced price / -€1.63
Available
Honda CR 125 1993

Electric Regulator 18236

Vicma
18236
€25.62 €27.25
Electric Regulator 18236
Hot Rods Water Pump Rebuild Kit Honda CR 125 1990-04
  • Reduced price / -€4.68
Available
Honda CR 125 1993

Hot Rods Water Pump Rebuild Kit Honda CR 125 1990-04

Hot Rods
WPK0009
€22.43 €27.12
Hot Rods Water Pump Rebuild Kit Kit includes water pump cover gasket or o-ring, water pump shaft bearing(s) and seal(s) to repair a leaking water pump seam and/or a failed bearing Precision micro bearing provide OE quality and durability High pressure/temperature mechanical rubber seals Does not include clutch cover gasket
Hiflofiltro Foam Air Filter HFF1012
  • Reduced price / -€2.60
Available
Honda CR 125 1993

Hiflofiltro Foam Air Filter HFF1012

Hiflofiltro
HFF1012
€12.98 €15.58
Dual-Stage Racing Foam Air FiltersCompetition off-road air filters manufactured in the Netherlands using a special dual-layer foam, formulated for maximum filtration and optimum air flow for improved power.Top quality materials and superior construction allow the filter to be used over and over again without any loss of performance.
Shorty Clutch Lever Honda CR
  • Reduced price / -€5.97
Available
Honda CR 125 1993

Shorty Clutch Lever Honda CR

MooseRacing
431101L
€12.79 €18.76
Alloy levers allow 2-finger control of the brake and clutch Complete with two-piece lever holder and adjuster Each assembly is labeled for easy identification Left and right assemblies sold separately
Apico Aluminum Twister Throttle Tube AP-THRALU3
  • Reduced price / -€9.15
Available
Honda CR 125 1993

Apico Aluminum Twister Throttle Tube AP-THRALU3

Apico
AP-THRALU3
€52.02 €61.17
Apico Twister Throttle Tube mxtotal.comSealed ball bearing virtually eliminates frictionFeatures nylon sleeve bearing on inboard endPrecision CNC machined aluminum tubeIncludes a free insert for all Pro Taper barsCrud plug stops grip glue from ruining bearingUsed by many top Pros worldwide
 Blackbird Rim Stickers Honda Black
  • Reduced price / -€8.94
Available
Honda CR 125 1993

Blackbird Rim Stickers Honda Black

Blackbird
5068R/20
€24.33 €33.28
Each kit contains: 8 rim stickers to be applied on the front wheel, 8 for the rear rim and two spare part sticker.The rim stickers for motocross, enduro, motard, and trial bikes are made using extremely high-performance, top-quality materials. The crystall sheet used is 0.5 mm thick, while the adhesive on the sticker has a strong, long-lasting hold.
Athena Fork Oil Seals Kit Honda CR 125 1992-93 / CR 250/500 1992-94 (43 x 54 x 9,5/10,5 mm)
  • Reduced price / -€1.60
Available
Dimensions: 43 x 54 x 9,5/10,5mmAthena offers the most complete range of fork oil seal kits and dust seal kits.The quality of Athena oil seals meets or exceeds OEM quality. For fitments please use the link below to the Athena fitment site online, and enter your bike details to find the correct part number.  Or you can match up your seals by dimension...
Apico Titane Flexi Brake & Clutch Lever Honda AP-FLEXIHON1TI
  • Reduced price / -€9.08
Available
Honda CR 125 1993

Apico Titane Flexi Brake & Clutch Lever Honda AP-FLEXIHON1TI

Apico
AP-FLEXIHON1TI
€81.68 €90.75
Apico Forged Brake & Clutch Flexi Pivot Lever Set Apico Factory Forged parts are designed, tested and manufactured for the serious competitor.Using years of racing and engineering experience Apico have blended quality designs, superior materials and precision manufacturing processes to create factory racing parts available toeveryone.Flexi Pivot Lever...
Blackbird Fork Protection Decal Honda CR/CRF
  • Reduced price / -€3.10
Available
Honda CR 125 1993

Blackbird Fork Protection Decal Honda CR/CRF

Blackbird
5134N
€17.04 €20.13
Our graphic kits for Motocross, Enduro, Motard are made using very good materials. We use a very performing raw material, named Crystall , 0,5 mm thick laminated with a very strong self adhesive that keeps its excellent qualities for a long time. Our stickers are screen printed using very resistant and brilliant inks.
DRC Rear Brake Caliper Pin 52mm
  • Reduced price / -€0.48
There are not enough products in stock
Honda CR 125 1993

DRC Rear Brake Caliper Pin 52mm

DRC
08-056
€7.78 €8.26
SPECIFICATIONS: - Features an 8 mm hex head, allowing quick and easy brake pad changes. ( Excluding D58-33-241 ) - Made of SUS304 stainless steel that resists corrosion, heat and galling. - Comes in a set for each specific configuration. - Replacement pins are available.           
DRC Front Brake Caliper Pin 37mm
  • Reduced price / -€0.48
There are not enough products in stock
Honda CR 125 1993

DRC Front Brake Caliper Pin 37mm

DRC
D58-33-072
€7.66 €8.14
SPECIFICATIONS: - Features an 8 mm hex head, allowing quick and easy brake pad changes. ( Excluding D58-33-241 ) - Made of SUS304 stainless steel that resists corrosion, heat and galling. - Comes in a set for each specific configuration. - Replacement pins are available.           
Apico Brake Lever AP-LEB11
Available
Honda CR 125 1993

Apico Brake Lever AP-LEB11

Apico
AP-LEB11
€17.55
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. 
ProX Crankshaft Seal Kit Honda CR 125 1986-07
  • Reduced price / -€0.61
Available
Honda CR 125 1993

ProX Crankshaft Seal Kit Honda CR 125 1986-07

ProX
42.1206
€9.51 €10.12
ProX Crankshaft Oil seals are made at the O.E. manufacturers in Japan. The Crankshaft Oil seals are available for many different applications like Motorcycle, ATV and Personal Watercraft.
Motion Pro Throttle Cable for Honda K28-2106
  • Reduced price / -€0.62
Available
Honda CR 125 1993

Motion Pro Throttle Cable for Honda K28-2106

Parts Unlimited
MP02-247
€9.64 €10.26
Motion Pro Throttle Cable Standard black vinyl coil-wound housing Meet or exceed OEM quality Inner nylon sleeve for longer life and smooth operation Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel
Motion Pro Clutch Cable for Honda CR 125 1990-97
  • Reduced price / -€0.68
Available
Honda CR 125 1993

Motion Pro Clutch Cable for Honda CR 125 1990-97

Motion Pro
K28-5502L
€10.59 €11.27
OEM-style cables are available in a wide variety of applications for most popular models. Cables are nylon lined and use precise OEM component dimensions. Terminal clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel.
ProX Piston Honda CR 125 1992-03
  • Reduced price / -€6.33
Available
Honda CR 125 1993

ProX Piston Honda CR 125 1992-03

ProX
01.1218
€99.24 €105.57
ProX pistons are precision machined on the latest, state of the art CNC equipment. The same low-expansion, low-friction piston alloy is used as is used for all major Japanese engine manufacturers.ProX Piston Kits are a first class solution to replace the original piston in your Motorcycle, Scooter, Moped, ATV, Personal Watercraft, etc. Coated for ultimate...
16.S12004 ProX Friction Plate Set Husqvarna CR / WR 125 2000-13
  • Reduced price / -€4.86
Available
€76.19 €81.06
All friction plates are made to exact OEM specifications and offer maximum performance, smooth clutch operation and durability.
Brake Master Rear Cylinder Rebuild Kit 06170020
  • Reduced price / -€2.07
Available
Honda CR 125 1993

Brake Master Rear Cylinder Rebuild Kit 06170020

MooseRacing
06-651X
€32.34 €34.41
Each kit contains all necessary components to rebuild a master cylinder Made by Nissin, an OEM supplier in Japan. Applications cover most popular models.
JT Sprocket JTF326
  • Reduced price / -€0.83
Available
Honda CR 125 1993

JT Sprocket JTF326

JT Racing
JTF326
€13.04 €13.88
Computer designed to achieve ultimate strength at minimum weight JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value Every sprocket meets or exceeds the highest possible quality standards Sprockets are heat-treated and beadblasted to reduce material surface tension Front sprockets
Twin Air Grand Prix Cover 160000GP
  • Reduced price / -€2.20
Available
Honda CR 125 1993

Twin Air Grand Prix Cover 160000GP

TwinAir
160000GP/10140103
€17.13 €19.34
Fit this over your Twin Air filter when your riding in severe conditions such as heavy dust and sand. This coarse foam pre-filter will act as an additional layer of protection and extend the service time between filter cleanings.
NGK Spark Plug Cap LB05F
  • Reduced price / -€1.10
Available
Honda CR 125 1993

NGK Spark Plug Cap LB05F

NGK
LB05F
€4.62 €5.72
NGK Spark Plug Cap LB05F - NGK spark plug resistor covers used with resistor spark plugs are the best combination against radio frequency interference - Protect aging engines from cutting out in wet conditions - For use with 7mm-diameter plug wires - Sold each
Kill Switch Honda CR / CRF / XR All
  • Reduced price / -€1.25
Available
Honda CR 125 1993

Kill Switch Honda CR / CRF / XR All

MooseRacing
688-8800
€19.58 €20.82
Stop button as the original, with the same connectors origin, can change without any poblem.
Hot Rots Crankshaft Honda CR 125 1990-07
  • Reduced price / -€25.37
Available
Honda CR 125 1993

Hot Rots Crankshaft Honda CR 125 1990-07

Hot Rods
4053
€228.30 €253.68
Hot Rods crankshafts are made from some of the highest quality forgings available, and thanks to an entire system of quality control checks and rechecks, these cranks meet or exceed OEM parameters.
Brake Caliper Rebuild Kit Rear Honda 1702-0097
  • Reduced price / -€1.62
Available
Honda CR 125 1993

Brake Caliper Rebuild Kit Rear Honda 1702-0097

MooseRacing
08-151X
€25.49 €27.12
BRAKE CALIPER REBUILD KIT: Each kit includes all necessary rubber components and brake pins if it’s applicable Made by Nissin, an OEM manufacturer in Japan Applications cover most popular models
Athena Top End Gaskets Kit Honda CR 125 1990-97
  • Reduced price / -€1.16
Available
Honda CR 125 1993

Athena Top End Gaskets Kit Honda CR 125 1990-97

Athena
P400210600126
€18.23 €19.40
Athena offers the most complete range of gaskets and gasket sets for every make and model of motorcycle, jet-ski, snow-mobile and outboard in the world.The quality of Athena's gaskets replaces and exceeds the seal offered by the original products. Athena's long time experience gained in supplying most prestigious O.E.M. Motorcycle manufacturers, has...
Needle Bearing Piston (15X19X17.3mm)
  • Reduced price / -€0.44
Available
Honda CR 125 1993

Needle Bearing Piston (15X19X17.3mm)

Shindy
09240131/MNB150190173
€6.92 €7.36
Piston pin needle cage bearings are manufactured from precision bearings and high-quality housing material.Each bearing is packaged in an individual box for easy identification.
Moose Racing Replacement Clutch Perch Honda XR 250/400 1996-2005
  • Reduced price / -€1.03
Available
€16.15 €17.18
STSTANDARD CLUTCH PERCH: Cast and polished 6061 aluminum Includes cable adjuster and pivot bolt Many include hot start Hot starts available separately for some applications Compatible with OEM and Moose Racing levers
Moose Racing Pro Shark W/ Bake Carrier M13-040
  • Reduced price / -€1.98
Available
Honda CR 125 1993

Moose Racing Pro Shark W/ Bake Carrier M13-040

MooseRacing
M13-040
€31.05 €33.03
The burliest rear disc guard on the market, offering protection for the caliper and the rotor This disc protector replaces the entire brake carrier for the most coverage available Replacement lower fin available, PART #M13-051 Made in the U.S.A. Thick aluminum alloy guard keeps out the rocks and roots Fits many popular o
Moose Racing Master Cylinder Rebuild Kit Front Honda 06170019
  • Reduced price / -€2.07
Available
€32.34 €34.41
Each kit contains all necessary components to rebuild a master cylinder Made by Nissin, an OEM supplier in Japan. Applications cover most popular models.
All Balls Master Cylinder Rebuild Kit Rear 18-1007
  • Reduced price / -€1.46
Available
Honda CR 125 1993

All Balls Master Cylinder Rebuild Kit Rear 18-1007

All Balls
AB18-1007
€22.25 €23.72
Each kit contains all necessary components to rebuild a master cylinder Made by Nissin, an OEM supplier in Japan. Applications cover most popular models.
ProX Clutch Baskets Honda CR 125 1987-99
  • Reduced price / -€17.00
Available
Honda CR 125 1993

ProX Clutch Baskets Honda CR 125 1987-99

ProX
17.1287F
€266.36 €283.36
ProX Clutch Baskets are precision machined from heat treated aircraft type aluminum alloy to O.E. precision standards. Sophisticated hard-anodising guarantees extended life under severest racing conditions. Each kit comes with the necessary hardware to make installation a snap mxtotal.com.
Rear Shock Rubber Stop SB16
  • Reduced price / -€1.86
Available
Honda CR 125 1993

Rear Shock Rubber Stop SB16

MooseRacing
SB16
€29.16 €31.02
Rubbers for rear shock. Improvement bottom and feel the shock life.
Vicma Brake Lever 70982
  • Reduced price / -€0.82
Available
Honda CR 125 1993

Vicma Brake Lever 70982

Vicma
70982
€12.97 €13.79
Quality 6061 T-6 forged aluminum Roller bearing in clutch pivot for effortless operation Designed to fit OE perch
Vicma Clutch Lever Honda CR 125/250 1987-95
  • Reduced price / -€0.76
Available
Honda CR 125 1993

Vicma Clutch Lever Honda CR 125/250 1987-95

Vicma
71182
€12.04 €12.80
Clutch Lever Honda CR 125/250 1987-95 original Clutch lever type, with the same shape and size.
Vicma Replacement Clutch Perch Honda CR 80/85/125/250 1987-2003
  • Reduced price / -€1.06
Available
€16.65 €17.71
Forged OEM Clutch Perch from Vicma, precision machined aluminum split perch design for easy mounting and adjustment Applications for clutch side only.Two part split perches install easily without the need to remove grips.
EBC Clutch Kit Honda CR 125 1986-99
  • Reduced price / -€8.26
Available
Honda CR 125 1993

EBC Clutch Kit Honda CR 125 1986-99

EBC Brakes
DRC002
€68.91 €77.17
Anti-swell, alloy impregnated heavy duty cork based facings provide smooth clutch take up and allow modulation, unlike paper clutches which tend to snatch. Complete engine set of friction plates, HD springs and STEEL SEPARATOR PLATES prevent premature driven plate wear, oil muddying and loss of stack height.
All Balls Rear Wheel Bearing For Honda CR 125/250 1990-99 / CR
  • Reduced price / -€1.51
Available
€23.66 €25.17
All Balls Bearings & SealsWheel bearings typically fail from water and dirt contamination. The All Balls Wheel Bearing Kit was developed in partnership with KML Bearing and is designed for the difficult operating environment of the powersport industry.
EBC Clutch Springs Honda CR 125 1986-99
  • Reduced price / -€0.91
Available
Honda CR 125 1993

EBC Clutch Springs Honda CR 125 1986-99

EBC Brakes
CSK24HONDA
€14.19 €15.10
EBC kit spring and deliver 10-15% more clamping pressure.This can help reduce clutch slippage or clutch wear faster on the computer.
EBC Clutch Springs Honda CR 125 2000-07
  • Reduced price / -€0.91
Available
Honda CR 125 1993

EBC Clutch Springs Honda CR 125 2000-07

EBC Brakes
CSK031
€14.19 €15.10
EBC kit spring and deliver 10-15% more clamping pressure.This can help reduce clutch slippage or clutch wear faster on the computer.
ProX Inner Clutch Hubs 18.1290
  • Reduced price / -€3.04
Available
Honda CR 125 1993

ProX Inner Clutch Hubs 18.1290

ProX
18.1290
€47.60 €50.64
ProX offers a complete line of inner clutch hubs for the Dirtbike and ATV segment. The inner hubs are manufactured by the leading OEM factory in Japan. The die-cast alloy parts are machined to OEM specifications and tolerance to be a direct and cost-efficient OEM replacement.
EBC Standard CK Series Clutch Kit Honda CRF 150 2007-09
  • Reduced price / -€2.46
Available
Honda CR 125 1993

EBC Standard CK Series Clutch Kit Honda CK1191

EBC Brakes
CK1191
€38.53 €40.98
Standard CK Clutch EBC unique alloy particle impregnated clutch facings that prevent burn up or slippage.
PH92125P Pro Circuit Platinum Pipes Honda CR 125 1993-97
  • Reduced price / -€42.29
Available
Honda CR 125 1993

Pro Circuit Platinum Pipes Honda CR 125 1993-97

Pro-Circuit
PH92125P
€307.27 €349.56
The Platinum Pipe has the same shaped cone sections as the popular Works Pipe, but utilizes plating on the body to protect it from everyday elements. Precision in design and engineering makes even the smallest details into a work of art. mxtotal.com The Platinum Pipe is a unique fusion of power, elegance and utility that pushes the boundaries of the...
Pro Circuit R-304 Silencer For Honda CR 125 1993-97
  • Reduced price / -€22.81
Available
Honda CR 125 1993

Pro Circuit R-304 Silencer For Honda CR 125 1993-97

Pro-Circuit
18210119
€151.92 €174.72
The R-304 Shorty silencer was developed as a full-race two-stroke silencer and was designed to increase power over stock exhaust. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used to secure the inlet cap and can be removed easily for quick...
Pro Circuit 304 Silencer For Honda CR 125 1993-97
  • Reduced price / -€22.81
Available
Honda CR 125 1993

Pro Circuit 304 Silencer For Honda CR 125 1993-97

Pro-Circuit
SH93125SE
€151.92 €174.72
With a clear and stylish design, the 304 Silencer will make a lasting impression. The slightly longer body offers reduced noise output when compared to the R-304. Its perfectly constructed lightweight cylindrical canister, combined with the brushed aluminum body and stainless steel inlet tube and end cap, give you a silencer that looks as good as it...
Kit DID Reinforced Transmission Honda CR 125 1987-99
  • Reduced price / -€8.77
Available
Honda CR 125 1993

Kit DID Reinforced Transmission Honda CR 125 1987-99

D.I.D.
KITDIDRCHO004
€137.35 €146.12
DID Transmission Kit Chain Reinforced Seals VX2GB Beta RR 400/500/525 2005-09. Kit DID Compustar transmission with crown and pinion Sunstar is choice the product of the best quality on the market.
DID standard transmission seals Kit Honda XR 650 2000-07
  • Reduced price / -€7.36
Available
Honda CR 125 1993

DID standard transmission seals Kit Honda XR 650 2000-07

D.I.D.
KITDIDSTHO025/37914/2-355948/VX2
€115.25 €122.61
Kit transmission DID standard GAS GAS EC 520 125 1996-11.Cadena NZ without seals, pinion steel crown 13z and 48ZKit DID Compustar transmission with crown and pinion is choice the product of the best quality on the market. It is always advisable to replace the pinion and crown (KIT)
Set rear wheel spokes Honda CRF 250/450 X 2002-15 (rim 18)
  • Reduced price / -€5.20
Available
Honda CR 125 1993

Set rear wheel spokes Honda CRF 250/450 X 2002-15 (rim 18)

MooseRacing
1-22-118-S
€81.57 €86.77
Stainless steel steel spokes are interchangeable with Moose Racing and stock rims and hubs304 grade stainless steel meets or exceeds OEM standardsConsistent-diameter design offers superior strength over stockSpokes come with matching nipplesSold in sets
Set Rear Wheel Spokes Honda CR / CRF (rim 19)
  • Reduced price / -€5.20
Available
Honda CR 125 1993

Set Rear Wheel Spokes Honda CR / CRF (rim 19)

MooseRacing
1-22-109-S
€81.57 €86.77
Stainless steel steel spokes are interchangeable with Moose Racing and stock rims and hubs304 grade stainless steel meets or exceeds OEM standardsConsistent-diameter design offers superior strength over stockSpokes come with matching nipplesSold in sets
VForce 3 Reed Valve Honda CR 125 1987-00 + 2002 / TM 125 2001-07
  • Reduced price / -€25.42
Available
Honda CR 125 1993

VForce 3 Reed Valve Honda CR 125 1987-00 + 2002 / TM 125 2001-07

V-Force
10080054/V301A
€196.15 €221.58
Double the reed tip surface over a conventional reed valve design. Increased bottom end, stronger mid-range and longer top-end. Greater efficiency due to reduced reed petal travel. More airflow means more horsepower. Reduced reed petal wear. Screw-free design eliminates risk of screws going through motor. Screw-free design enables su
Vertex Piston Rings 53010005400
  • Reduced price / -€1.25
Available
Honda CR 125 1993

Vertex Piston Rings 53010005400

Vertex
09120170/53010005400
€19.51 €20.75
Vertex Ring Set Restore the compression to your tired engine with a new set of Piston rings from vertex. - Replacement two-stroke rings sold individually...
Hot Rods Crankshaft Main Bearing and Seal Kit Honda CR 125
  • Reduced price / -€3.41
Available
€53.40 €56.81
Like other Hot Rods products, these main bearing and seal kits are built to the highest quality standards that meet or exceed those of the O.E.M. Additionally, not only will Hot Rods main bearing and seal kits work in rebuilding a Hot Rods crankshaft; but, they also work in rebuilding O.E.M. cranks as well.
ProX Connecting Rod Kit Motocross Honda CR 125 1988-07
  • Reduced price / -€20.16
Available
€96.91 €117.07
PROX Connecting Rod Kits are made out of the toughest alloys available today. O.E. specifications and tolerances are meticulously maintained, a guarantee for easy installation and trouble free performance. 
Athena Gasket Kit Complete Honda CR 125 1990-97
  • Reduced price / -€2.07
Available
Honda CR 125 1993

Athena Gasket Kit Complete Honda CR 125 1990-97

Athena
400210850126
€32.27 €34.34
Athena offers the most complete range of gaskets and gasket sets for every make and model of motorcycles, jet-ski, snow-mobiles and outboards in the world. The quality of our gaskets replaces and exceeds the seal offered by the original products. Our long time experience gained in supplying most prestigious OEM Motorcycle manufacturers, has brought to our...
Zeta Pivot CP Brake Lever...
  • Reduced price / -€3.41
Available
Honda CR 125 1993

Zeta Pivot CP Brake Lever ZE41-3206 3 Finger

Zeta Racing
ZE41-3206
€53.54 €56.95
PIVOT LEVER FP SPECIFICATIONS: - Pivot lever M-type comes with forged lever arm. Lever is specially designed for motocross, ED and off road racing. - Lever to fold outward to prevent breaking in the event of a crash. - Automatic lever position restoration provides quick recovery from the crash. - Ultra precision machine cut lever adapter for super...
Boyesen Ignition Cover for Honda CR 125 1988-07
  • Reduced price / -€7.90
Available
Honda CR 125 1993

Boyesen Ignition Cover for Honda CR 125 1988-07

Boyesen
SC01AB
€123.83 €131.73
Look like a professional with the Factory Ignition Cover. Seals properly, guarding inside of engine from dirt and water and outlasts stock covers.
K&S Water Pump Rebuild Kit Honda CR 125 1990-04
  • Reduced price / -€1.72
Available
Honda CR 125 1993

K&S Water Pump Rebuild Kit Honda CR 125 1990-04

All Balls
75-1007
€26.83 €28.54
K&S Water Pump Repair Kit Includes all gaskets, washers, seals and O-rings to rebuild water pump
Moose Racing Aluminium Chain Guide Honda CR 125/250/500 1990-04
  • Reduced price / -€3.23
Available
€50.55 €53.78
CHAIN GUIDE: Replace fragile stock chain guides with these rugged aluminum guides Aircraft aluminum withstands hard hits from logs and rocks All mounting hardware and wear blocks included (unless noted) Replacement wear blocks available Made in the U.S.A.
JT Rear Sprocket JTR210
  • Reduced price / -€2.06
Available
Honda CR 125 1993

JT Rear Sprocket JTR210

JT Racing
JTR210
€32.15 €34.21
Computer designed to achieve ultimate strength at minimum weight JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value Every sprocket meets or exceeds the highest possible quality standards Sprockets are heat-treated and beadblasted to reduce material surface tension Front sprockets
Moose Racing Steering Stem Bearing Seal Kit 0410-0026
  • Reduced price / -€5.26
Available
Honda CR 125 1993

Moose Racing Steering Stem Bearing Seal Kit 0410-0026

MooseRacing
22-1010
€54.39 €59.65
Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings, or a high-quality replacement if your bike comes with stock taper bearings Tapered roller bearings provide decreased maintenance along with less wear, smoother operation and longer life Kits come complete with both upper and lower taper bearing cups, cones, and most...
Moose Racing Lower Chain Roller 12310036
  • Reduced price / -€1.25
Available
Honda CR 125 1993

Moose Racing Lower Chain Roller 12310036

MooseRacing
79-5008
€19.58 €20.82
SEALED CHAIN ROLLERS: Reduce the friction dragging down your drivetrain Polyurethane roller with 98A durometer hardness for long lifePrecision contact sealed bearings keep water and dirt away
BOLT Washer Cap
  • Reduced price / -€1.21
Available
Honda CR 125 1993

BOLT Washer Cap

Bolt
BT-GTB
€18.86 €20.07
BOLT Washer Cap - Screw with washer and cap made in 6061 in one piece. - Available for Honda, Yamaha, Suzuki and Kawasaki.
BOLT chain tensioning bolts M8 x 50mm
  • Reduced price / -€0.45
Available
Honda CR 125 1993

BOLT chain tensioning bolts M8 x 50mm

Bolt
BT-CH
€7.09 €7.54
For stock applications (this item does not work with our custom billet chain adjuster block fasteners). Class 8 zinc plated steel M8x50mm hex head bolts and M8 flange jamb nuts with a 12mm A/F (hex).Fits all stock applications that use an 8mm bolt (most off-road and street models).Our hardware meets or exceeds OEM specs. Proudly designed
Zeta Oil Filler Plug ZE89-2112 Blue
  • Reduced price / -€0.64
There are not enough products in stock
Honda CR 125 1993

Zeta Oil Filler Plug ZE89-2112 Blue

Zeta Racing
ZE89-2112
€10.03 €10.67
- CNC machined oil filler cap. - Includes safety wire holes. - Available in anodized colors of red, blue, and orange for KTM. - Laser printed ZETA logo.
All Balls Front Wheel Bearing Honda CR 125/250/500 1985-94
  • Reduced price / -€1.15
Available
Honda CR 125 1993

All Balls Front Wheel Bearing Honda CR 125/250/500 1985-94

All Balls
AB25-1075
€17.98 €19.13
All Balls Bearings & SealsWheel bearings typically fail from water and dirt contamination. The All Balls Wheel Bearing Kit was developed in partnership with KML Bearing and is designed for the difficult operating environment of the powersport industry.
Apico Cluth Lever Honda AP-LEC11
  • Reduced price / -€2.52
Available
Honda CR 125 1993

Apico Cluth Lever Honda AP-LEC11

Apico
AP-LEC11
€13.89 €16.41
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
All Balls Rrear Shock Seal 37-1004
  • Reduced price / -€2.87
Available
Honda CR 125 1993

All Balls Rrear Shock Seal 37-1004

All Balls
AB37-1004
€44.95 €47.82
All Balls Rear Shock Seal Head KitAll Rear Shock Seal Kits are complete assemblies, ready to install into the shock body. No longer is it necessary to replace bushings, seals, O-rings etc. All Rear Shock Seal Kits include Aluminum body, dust seal, Bushing, oil seal, O-ring, internal guide bushing/ washer, snap ring and top out bumper. All seal heads are...
Apico Shift Lever Honda CR 125 1987-07
  • Reduced price / -€7.26
Available
Honda CR 125 1993

Apico Shift Lever Honda CR 125 1987-07

Apico
AP-GPF100
€29.74 €37.00
These forged aluminium gear pedals are designed to be extremely strong and durable, they feature sprung loaded, knurled tips, forged arms and quality hardware. The natural satin finish will keep them looking good whatever conditions you throw at them.
UFO Front Number Plate Honda HO02607
Available
Honda CR 125 1993

UFO Front Number Plate Honda HO02607

UFO
HO02607
€34.71
UFO MX Front Number Plate Replacement front number plate from UFO Plastic is color-matched to stock or in optional works colors Pieces are already drilled and can be mounted easily to stock locations Made in Italy
UFO Fork Protectors for Honda CR 125/250/500 1991-97 Red
Available
Honda CR 125 1993

UFO Fork Protectors for Honda CR 125/250/500 1991-97

UFO
HO02647/04120196
€24.42
With over 30 years experience, UFO Plastics has become the standard in replacement off-road plastic because it has the highest standards of quality and fit and is less expensive than stock plastic. When your O.E.M. Fork Guards need to be replaced, the UFO Fork Guards are an affordable, more durable option and are built to exceed O.E.M. specifications.
UFO Rear Fender Honda CR 125 1993-96 / 250 1992-96
Available
€27.01
UFO Replacement Plastics mxtotal.com Either color matched to OEM or optional works colors Predrilled pieces mount easily to stock Radiator covers, side panels, frame guards and fork tube protectors sold in pairs Front disc covers for conventional forks include fork and disc guard; upside-down forks include disc guard only Made in Italy