Honda CR 125 1994

Parts for Honda CR 125 1994 motocross bike

Here you can see all the spare parts and accessories available for Honda CR 125 1994

If you are not sure if your bike is of this model and year, please check that your chassis number is comprised between:  JE015500001   and this one: JE015599999  (If there is an asterisk you can change it by any number or letter ).

IMPORTANT: If you are sure of the year of your motorcycle but do not match the indicated chassis number, please contact our technicians.

SH93125-SE Pro Circuit 304 Silencer SH93125-SE
Available
Honda CR 125 1994

Pro Circuit 304 Silencer SH93125-SE

Pro-Circuit
SH93125-SE
€169.56
With a clear and stylish design, the 304 Silencer will make a lasting impression. The slightly longer body offers reduced noise output when compared to the R-304. Its perfectly constructed lightweight cylindrical canister, combined with the brushed aluminum body and stainless steel inlet tube and end cap, give you a silencer that looks as good as it...
SH93125-RE Pro Circuit R-304 Silencer Shorty SH93125-RE
Available
Honda CR 125 1994

Pro Circuit R-304 Silencer Shorty SH93125-RE

Pro-Circuit
SH93125-RE
€169.56
The R-304 Shorty silencer was developed as a full-race two-stroke silencer and was designed to increase power over stock exhaust. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used to secure the inlet cap and can be removed easily for quick...
1119312K Pro Circuit R-304 Silencer Ti-2 Honda 1119312K
Available
Honda CR 125 1994

Pro Circuit R-304 Silencer Ti-2 Honda 1119312K

Pro-Circuit
1119312K
€394.77
The R-304 Shorty silencer was developed as a full-race two-stroke silencer and was designed to increase power over stock exhaust. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used to secure the inlet cap and can be removed easily for quick...
M-21-603H/21121143 Stator Honda CR 125/250
Available
Honda CR 125 1994

Stator Honda CR 125/250

MooseRacing
M-21-603H/21121143
€145.14
ElectroSport uses high quality lamination cores to replace the pressed steel clamshell design that is used on the OEM stator. This new core is wound with the highest quality copper winding wire. The temperature rating of these windings is much higher than the OEM stator offers which increases reliability dramatically.
M8801/ 688-8800 Moose Racing Kill Switch M8801
Available
Honda CR 125 1994

Moose Racing Kill Switch M8801

MooseRacing
M8801/ 688-8800
€20.51
Stop Button as original, equal origen connectors, so you can change without any poblem.
M5591028 Moose Racing Clutch Lever "SHORTY" Honda M5591028
Available
Honda CR 125 1994

Moose Racing Clutch Lever "SHORTY" Honda M5591028

ASV
M5591028
€12.04
Pivot lever M-type comes with forged lever arm. Lever is specially designed for motocross, ED and off road racing. Lever to fold outward to prevent breaking in the event of a crash. Automatic lever position restoration provides quick recovery from the crash.
2140E+1124E copy of Blackbird Graphic Kit Dream 3 Honda 2140E
Available
Honda CR 125 1994

copy of Blackbird Graphic Kit Dream 3 Honda 2140E

Blackbird
2140E+1124E
€115.82
Adhesives for motocross and enduro are made with materials highly efficient and optimum quality. It has a thickness of 0.5 mm, is strong and stands the test of time.The impression is of type uses resistant inks screen and brilliant. The kit includes: radiators cover, front and rear fenders and fork protectors.
2140E Blackbird Graphic Kit Dream 3 Honda 2140E
Available
Honda CR 125 1994

Blackbird Graphic Kit Dream 3 Honda 2140E

Blackbird
2140E
€69.49
Adhesives for motocross and enduro are made with materials highly efficient and optimum quality. It has a thickness of 0.5 mm, is strong and stands the test of time.The impression is of type uses resistant inks screen and brilliant. The kit includes: radiators cover, front and rear fenders and fork protectors.
02-0247 Motion Pro Throttle Cable for Honda +4 Motion Pro 02-0247
Available
Honda CR 125 1994

Motion Pro Throttle Cable for Honda +4 Motion Pro 02-0247

Motion Pro
02-0247
€13.55
Motion Pro Throttle Cable Standard black vinyl coil-wound housing Meet or exceed OEM quality Inner nylon sleeve for longer life and smooth operation Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel
19.G1287 PROX Clutch Cover Gasket Honda 19.G1287
Available
Honda CR 125 1994

PROX Clutch Cover Gasket Honda 19.G1287

ProX
19.G1287
€7.49
Clutch Cover Gasket Complementary gaskets to complete ProX clutch componentsMade from high-quality material for ultimate sealing
02-0058 Motion Pro Clutch Cable for Honda CR 125 02-0058
Available
Honda CR 125 1994

Motion Pro Clutch Cable for Honda CR 125 02-0058

Motion Pro
02-0058
€14.11
OEM-style cables are available in a wide variety of applications for most popular models. Cables are nylon lined and use precise OEM component dimensions. Terminal clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel.
SDP-815MX Rear Brake pads Sintered DP SDP-815MX
Available
Honda CR 125 1994

Rear Brake pads Sintered DP SDP-815MX

DP Brakes
SDP-815MX
€24.95
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
SDP814MX Front Brake pads Sintered DP SDP814MX
Available
Honda CR 125 1994

Front Brake pads Sintered DP SDP814MX

DP Brakes
SDP814MX
€24.95
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
DP815 Rear Brake pads Sintered DP DP815
Available
Honda CR 125 1994

Rear Brake pads Sintered DP DP815

DP Brakes
DP815
€23.09
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
17110298/110295 Moto Master Brake Disc Front Flamed Honda 17110298
Available
Honda CR 125 1994

Moto Master Brake Disc Front Flamed Honda 17110298

Moto-Master
17110298/110295
€91.96
Brake disc Offroad Flame      FRAME FRONT BRAKE DISCS FLAME     Flame brake discs are manufactured to the most stringent tolerances and specifications using a specially hardened premium quality stainless steel.     The material guarantees extremely low wear of
MP02-058 Motion Pro Clutch Cable for Honda MP02-058
Available
Honda CR 125 1994

Motion Pro Clutch Cable for Honda MP02-058

Motion Pro
MP02-058
€14.11
OEM-style cables are available in a wide variety of applications for most popular models. Cables are nylon lined and use precise OEM component dimensions. Terminal clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel.
17200231/M107-ORG Rear Brake pads Sintered Moose Racing 17200231
Available
Honda CR 125 1994

Rear Brake pads Sintered Moose Racing 17200231

MooseRacing
17200231/M107-ORG
€19.30
STANDARD SINTERED METAL BRAKE PADS      With a coefficient of friction GG and manufactured with the popular sintered metal composite of DP Brakes     The gray aluminum oxide ceramic material on the back plate keeps heat away from the piston and the brake fluid under extreme conditions so that there is no reductio
07.RC520120XCG Pro X Chain 520 X-Ring 07.RC520120XCG gold
Available
Honda CR 125 1994

Pro X Chain 520 X-Ring 07.RC520120XCG gold

ProX
07.RC520120XCG
€98.00
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120XC Pro X Chain 520 X-Ring 07.RC520120XC
Available
Honda CR 125 1994

Pro X Chain 520 X-Ring 07.RC520120XC

ProX
07.RC520120XC
€96.07
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120CG Pro X Chain 520 MX 07.RC520120CG gold
Available
Honda CR 125 1994

Pro X Chain 520 MX 07.RC520120CG gold

ProX
07.RC520120CG
€75.26
Transmission chains 420 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
07.RC520120C Pro X Chain 520 MX 07.RC520120C
Available
Honda CR 125 1994

Pro X Chain 520 MX 07.RC520120C

ProX
07.RC520120C
€73.79
Transmission chains 520 MX     Manufactured exclusively for ProX by the reputed and leading OEM factory in Japan    The pins receive a special treatment that provides an extremely hard coating, with the interior less hard to increase the resistance while reducing the general degas of
6200233 Moto Master Rear Sprocket 520 6200233 red
Available
Honda CR 125 1994

Moto Master Rear Sprocket 520 6200233 red

Moto-Master
6200233
€69.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200232 Moto Master Rear Sprocket 520 6200232
Available
Honda CR 125 1994

Moto Master Rear Sprocket 520 6200232

Moto-Master
6200232
€69.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200223 Moto Master Rear Sprocket 520 6200223 red
Available
Honda CR 125 1994

Moto Master Rear Sprocket 520 6200223 red

Moto-Master
6200223
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200222 Moto Master Rear Sprocket 520 6200222
Available
Honda CR 125 1994

Moto Master Rear Sprocket 520 6200222

Moto-Master
6200222
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
6200211 Moto Master Rear Sprocket 520 6200211
Available
Honda CR 125 1994

Moto Master Rear Sprocket 520 6200211

Moto-Master
6200211
€39.89
Steel Ultralight Rear Sprocket     Top grade hardened steel, will outlast an aluminium sprocket up to 3 times    Special coating for extra durability   
112150/17111004 Moto Master Brake Disc Front Honda 112150
Available
Honda CR 125 1994

Moto Master Brake Disc Front Honda 112150

Moto-Master
112150/17111004
€215.38
Moto-Master quality standards. Made from specially hardened premium quality  stainless steel, NITRO discs allow for high performance braking while exhibiting extremely little wear. Venting slots are integrated in to the disc design to help aid with cooling and cleaning of the brake pad contact surface. For best performance we recommend using...
112082/17110780 Moto Master Brake Disc Front Honda 112082
Available
Honda CR 125 1994

Moto Master Brake Disc Front Honda 112082

Moto-Master
112082/17110780
€140.36
Moto-Master quality standards. Made from specially hardened premium quality  stainless steel, NITRO discs allow for high performance braking while exhibiting extremely little wear. Venting slots are integrated in to the disc design to help aid with cooling and cleaning of the brake pad contact surface. For best performance we recommend using...
UFO Complete Body Kit Honda HOKIT096
Available
Honda CR 125 1994

UFO Complete Body Kit Honda HOKIT096

UFO
HOKIT096
€156.21
UFO Complete Body Kit Motocross Enduro Leave your bike like new, with a set of high-quality plastics, as expected from UFO Plast.In the same way, without loss of colors such as original plastic of your bike and available in several colors.
Polisport rear shock protector Honda 8905000
  • Reduced price / -€0.01
Available
Honda CR 125 1994

Polisport rear shock protector Honda 8905000

Polisport
8905000
€15.60 €15.61
Polisport Rear Shock Mud plate Replacement plastic from PolisportPieces are already drilled and can be mounted easily to stock locations
Moose Racing Carburetor Repair Kit Honda CR 125 1990 - 1995
  • Reduced price / -€7.03
Available
Honda CR 125 1994

Moose Racing Carburetor Repair Kit Honda CR 125 1990 - 1995

MooseRacing
10030928
€27.77 €34.80
Moose Racing Carb Repair Kit Complete kits to rebuild OEM carburetors mxtotal.com Each kit contains all necessary gaskets, O-rings, float valve and jets Supplied to Moose Racing by the same supplier the OEMs use GENERIC PHOTO
Apico Brake Lever AP-LEB11B black
Available
Honda CR 125 1994

Apico Brake Lever AP-LEB11B black

Apico
AP-LEB11B
€17.55
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall.
Apico Cluth Lever AP-LEC11LB long black
Available
Honda CR 125 1994

Apico Cluth Lever AP-LEC11LB long black

Apico
AP-LEC11LB
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Cluth Lever AP-LEC11SB Short black
Available
Honda CR 125 1994

Apico Cluth Lever AP-LEC11SB Short black

Apico
AP-LEC11SB
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Cluth Lever AP-LEC11S Short
Available
Honda CR 125 1994

Apico Cluth Lever AP-LEC11S Short

Apico
AP-LEC11S
€15.13
Apico cold forged levers and holders offer legendary strength against impact. By cold forging, the levers bend rather than break, hopefully allowing you to continue after a fall. To further reduce lever damage all Apico holders also come fitted with a nylon sleeve so it will rotate rather than break in an impact. Huge range of applications available and...
Apico Clutch Cable Honda CR 125
  • Reduced price / -€3.15
Available
Honda CR 125 1994

Apico Clutch Cable Honda CR 125

Apico
45-2008/06521679
€17.32 €20.46
Apico Clutch Cable - OEM-style cables are available in a wide variety of applications for most popular models - Cables are nylon lined and use precise OEM component dimensions - Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch...
EBC Brake Disc Moto Cross Front Honda MD6001CX
  • Reduced price / -€7.76
Available
Honda CR 125 1994

EBC Brake Disc Moto Cross Front Honda MD6001CX

EBC Brakes
17110884/MD6001CX
€69.77 €77.52
A new ultra lightweight performance brake rotor to provide superb visual appeal for riders wishing to replace or upgrade their original brake rotors. The new Vee-Notch™ design offers a self cleaning high pressure contact pad-to-rotor brake enhancement.
NGK Iridium Spark Plug BR8EIX
  • Reduced price / -€9.21
Available
Honda CR 125 1994

NGK Iridium Spark Plug BR8EIX

NGK
BR8EIX
€15.90 €25.11
NGK Iridium IX Spark PlugDelivering performance, durability and anti-fouling capability, NGK spark plugs use an iridium design to give your engine the absolute best.
Moose Racing steel / aluminium rear sprocket Honda
  • Reduced price / -€3.32
Available
Honda CR 125 1994

Moose Racing steel / aluminium rear sprocket Honda

MooseRacing
1210146
€51.99 €55.31
MOOSE RACING DUAL SPROCKETS Designed to outlast standard aluminum rear sprockets and is much lighter than steel rear sprockets mxtotal.com Inner ring is made from 100% German aluminum using ISO 7075-T6 aluminum and the outer ring is made from heavy duty steel Self-cleaning mud grooves between each tooth to prevent dirt build up Inne
Moose Racing Water Pump Repair Kit Honda CR 125 1990-04
  • Reduced price / -€2.80
Available
Honda CR 125 1994

Moose Racing Water Pump Repair Kit Honda CR 125 1990-04

MooseRacing
09345182
€43.71 €46.50
WATER PUMP REPAIR KITS Includes every gasket, o-ring, bearing and seal required to rebuild a water pump mxtotal.com Typical kits include the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located
VForce 3 Replacement Reed Petals 3P602H
  • Reduced price / -€6.06
Available
Honda CR 125 1994

VForce 3 Replacement Reed Petals 3P602H

V-Force
10080077/3P602H
€74.40 €80.47
Are you checking your reed petals for signs of normal wear? You should be. A reed petal is a wear item, and as such should be checked regularly for signs of wear and fraying. mxtotal.com A reed petal is opening and closing 144 times per second at 8,000 RPM, so it's understandable reeds can wear. If wear and/or fraying is visible, it's time to replace your...
UFO Front Number Plate Honda HO02629
  • Reduced price / -€1.05
Available
Honda CR 125 1994

UFO Front Number Plate Honda HO02629

UFO
HO02629
€45.02 €46.08
UFO MX Front Number Plate Replacement front number plate from UFO Plastic is color-matched to stock or in optional works colors Pieces are already drilled and can be mounted easily to stock locations Made in Italy
D.I.D 520 MX Super Roller Chain 116 L
  • Reduced price / -€6.12
Available
Honda CR 125 1994

D.I.D 520 MX Super Roller Chain 116 L

D.I.D.
1148035116
€95.89 €102.02
D.I.D. 520MX Gold Chain Gold and black plates D.I.D. is the #1 chain manufacturer in the world Solid rollers Shot-peened parts High cylindrical and roundness accuracy Exacting tolerances provide low friction Pre-stretched Extended riveted bushing "Anti-Kink" design Special alloy stee
Vicma Clutch disc separators Honda CR 125 1986-99 / Husqvarna
  • Reduced price / -€0.96
Available
Made of stainless Not aluminum. Like other clutch disks drive mxtotal.comWeight gain separators on adds fly wheel effect. Helps Boot and traction.Not fadeor extending, As the plates aluminum.Life300% more already that the spacers are not aluminum.Sold in sets.  
Moose Racing Competition lever sets Honda 44-51075
  • Reduced price / -€1.29
Available
Honda CR 125 1994

Moose Racing Competition lever sets Honda 44-51075

MooseRacing
4451075/53175-ML3-790SH
€20.22 €21.51
Shorty Style Power Lever Set Alloy levers allow two-finger control of the brake and clutch Set includes brake and clutch short power levers Each lever set is poly bagged and labeled for easy identification Levers only; perch not included
All Balls Throttle Cable for Honda CR 125 1993-99 / CR250
  • Reduced price / -€1.16
Available
€18.28 €19.44
Clutch and Throttle Cable assmeblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM mold
All Balls Clutch Cable Honda CR125 1987-97 + 2000-03
  • Reduced price / -€1.16
Available
Honda CR 125 1994

All Balls Clutch Cable Honda CR125 1987-97 + 2000-03

All Balls
06521679/45-2008
€18.28 €19.44
Clutch Cable assemblie Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded compo
Stator Honda CR 125 1992-95 / CR 250 1989-91 ( OEM #:
  • Reduced price / -€9.72
Available
€152.31 €162.03
ElectroSport uses high quality lamination cores to replace the pressed steel clamshell design that is used on the OEM stator. This new core is wound with the highest quality copper winding wire. The temperature rating of these windings is much higher than the OEM stator offers which increases reliability dramatically.
Apico Rep Throttle Sleeve AP-THR3
  • Reduced price / -€0.30
Available
Honda CR 125 1994

Apico Rep Throttle Sleeve AP-THR3

Apico
AP-THR3
€12.83 €13.13
Replace OEM throttle sleeves mxtotal.com Heavier duty and exceed the quality and durability of OEM sleeves Will not scar bars like aluminum sleeves Nylon fabric composite material Pop-out end caps for use with bar-end-type handguards, unless noted Molded ridges to help secure grips One-piece tube and reel design
Apico Throttle Cable Honda CR 125 - 250 1984-02 / CR 500 1984-01
  • Reduced price / -€6.70
Available
€16.34 €23.04
Apico Clutch Cable - OEM-style cables are available in a wide variety of applications for most popular models - Cables are nylon lined and use precise OEM component dimensions - Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch...
Apico Shift Lever Red Honda CR 125 1987-07
  • Reduced price / -€7.26
Available
Honda CR 125 1994

Apico Shift Lever Red Honda CR 125 1987-07

Apico
AP-GPF100R
€29.74 €37.00
These forged aluminium gear pedals are designed to be extremely strong and durable, they feature sprung loaded, knurled tips, forged arms and quality hardware. The natural satin finish will keep them looking good whatever conditions you throw at them.
All Balls wheel spacers Rear Honda CR 125/250 1988-94 / CR 500
  • Reduced price / -€2.63
Available
Honda CR 125 1994

All Balls wheel spacers Rear Honda CR 125/250 1988-94 / CR 500 1988-01

All Balls
11-1013-1/02220056
€41.20 €43.83
All Balls Racing Wheel Spacers are a long life spacer that features a light weight black anodized 6061-T6 aluminum body with a zinc plated, hardened steel shell for durability. Aluminum body is vehicle specific so be sure to reference the photo when purchasing
All Balls wheel spacers Front Honda CR 125/250/500 1992-94
  • Reduced price / -€1.66
Available
Honda CR 125 1994

All Balls wheel spacers Front Honda CR 125/250/500 1992-94

All Balls
11-1002/02220045
€26.00 €27.66
All Balls Racing Wheel Spacers are a long life spacer that features a light weight black anodized 6061-T6 aluminum body with a zinc plated, hardened steel shell for durability. Aluminum body is vehicle specific so be sure to reference the photo when purchasing
All Balls Fork Bushing Kit Honda CR 125 1994-96
  • Reduced price / -€3.03
Available
Honda CR 125 1994

All Balls Fork Bushing Kit Honda CR 125 1994-96

All Balls
AB38-6009/04500115
€47.31 €50.34
All Balls Racing Fork Seals & Fork Bushing kits for Dirt Bikes & Motorcycles are manufactured to OEM specifications & tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime mxtotal.com.Fork Bushing Kits feature slider and leg bushings along with all...
ProX Crankshaft Bearing & Seal Kits Honda CR 125 1986-07
  • Reduced price / -€7.19
Available
Honda CR 125 1994

ProX Crankshaft Bearing & Seal Kits Honda CR 125 1986-07

ProX
09240297/23.CBS12086
€39.46 €46.65
ProX Crankshaft Bearing & Seal Kits offer you reliability and carefree driving. The sets contain all parts you need for rebuilding your crankshaft and can be used in combination with all other ProX or OEM crankshaft related products. Next to the high quality ProX connecting rod kits the Crankshaft Bearing & Seal Kits are completing the crankshaft...
All Balls Caliper Repair Kit Rear 18-3028
  • Reduced price / -€1.57
Available
Honda CR 125 1994

All Balls Caliper Repair Kit Rear 18-3028

All Balls
AB18-3028/17020276
€24.73 €26.31
BRAKE CALIPER REBUILD KIT: Each kit includes all necessary rubber components and brake pins if it’s applicable Made by Nissin, an OEM manufacturer in Japan Applications cover most popular models
Vertex Piston Kit Honda CR 125 1992-99
  • Reduced price / -€7.56
Available
Honda CR 125 1994

Vertex Piston Kit Honda CR 125 1992-99

Vertex
09102175/22189
€118.42 €125.99
1 Piston Ring Vertex Piston Kit Restore that crisp clean power that your dirtbike or quad use to have with a new Piston Kit from Vertex. Or step up the power with a high compression Piston Kit, All kits are standard compression unless noted. All pistons are heat-treated with a T-5 hardening and tempering c
EBC Brake Front pads Sintered FA125R
  • Reduced price / -€2.32
Available
Honda CR 125 1994

EBC Brake Front pads Sintered FA125R

EBC Brakes
FA125R
€26.47 €28.80
For maximum durability, EBC presents its tablets from the "R" series high density. Material copper based sintered manufactured in our own facilities in the U.S., the "R" series brake pads for ATV motocross and has become a reference in the market of non-original spare parts, offering long life , high resistance to contamination by mud, water, sand, dust,...
EBC Rear Brake Pads Sintered Brake Pads FA131R
  • Reduced price / -€2.34
Available
Honda CR 125 1994

EBC Rear Brake Pads Sintered Brake Pads FA131R

EBC Brakes
FA131R
€26.46 €28.80
For maximum durability, EBC presents its tablets from the "R" series high density. Material copper based sintered manufactured in our own facilities in the U.S., the "R" series brake pads for ATV motocross and has become a reference in the market of non-original spare parts, offering long life , high resistance to contamination by mud, water, sand, dust,...
Boyesen Clutch cover for Honda CR 125 1987-99
  • Reduced price / -€16.37
Available
Honda CR 125 1994

Boyesen Clutch cover for Honda CR 125 1987-99

Boyesen
CC01B
€126.11 €142.48
Set your ride apart from the rest with the ultimate look in race performance Lightweight factory clutch covers provide years of outstanding protection; guaranteed not to warp Individually surfaced for a perfect, leak-free fit Super-tough, powder-coated finish resists weathering and wear and tear Asbestos-free gasket is bound with nitrile for tight
Zeta Oil Filler Plug ZE89-2110 Red
  • Reduced price / -€0.65
There are not enough products in stock
Honda CR 125 1994

Zeta Oil Filler Plug ZE89-2110 Red

Zeta Racing
ZE89-2110
€10.02 €10.67
- CNC machined oil filler cap. - Includes safety wire holes. - Available in anodized colors of red, blue, and orange for KTM. - Laser printed ZETA logo.
Apico Titanium Flexi Brake & Clutch Lever Honda AP-FLEXIHON1RD
  • Reduced price / -€9.08
Available
€81.68 €90.75
Apico Forged Brake & Clutch Flexi Pivot Lever Set Apico Factory Forged parts are designed, tested and manufactured for the serious competitor.Using years of racing and engineering experience Apico have blended quality designs, superior materials and precision manufacturing processes to create factory racing parts available toeveryone.Flexi Pivot Lever...
Spark Plug Cap
  • Reduced price / -€1.25
Available
Honda CR 125 1994

Spark Plug Cap

Vicma
259/VMA
€2.48 €3.73
Spark Plug Cap - NGK spark plug resistor covers used with resistor spark plugs are the best combination against radio frequency interference - Protect aging engines from cutting out in wet conditions - For use with 7mm-diameter plug wires - Sold each
Spark Plug Cap Red
  • Reduced price / -€0.74
Available
Honda CR 125 1994

Spark Plug Cap Red

Vicma
260/VMA
€2.99 €3.73
Spark Plug Cap - NGK spark plug resistor covers used with resistor spark plugs are the best combination against radio frequency interference - Protect aging engines from cutting out in wet conditions - For use with 7mm-diameter plug wires - Sold each
JT Aluminium Rear Sprocket JTA210
  • Reduced price / -€2.76
Available
Honda CR 125 1994

JT Aluminium Rear Sprocket JTA210

JT Racing
JTA210
€43.23 €45.99
 Made from advanced aviation-grade 7075-T6 aluminium alloy, optimal lightweight design and CNC machined for performance and lifespan! All aluminium MX rear racing sprockets are manufactured from the best materials with a special self-cleaning design, and hand-finished to perfection.
Moto Master Rear Brake Pads 091811
  • Reduced price / -€7.78
Available
Honda CR 125 1994

Moto Master Rear Brake Pads 091811

Moto-Master
17211264/091811
€14.56 €22.34
ProX sintered metal brake pads! The ProX brake pads are produced under a very strict sintering process. In this sintering process metalic particles are fused together in combination with heat and pressure.
RK 520 Super Roller Chain FO520MXZ4 118-L Red
  • Reduced price / -€6.33
Available
Honda CR 125 1994

RK 520 Super Roller Chain FO520MXZ4 118-L Red

RK Racing Chain
99480118
€99.21 €105.54
All feature heavier side plates for more strength and resistance to stretch MXZ racing chains are made for the serious motocross racer with all components heat treated for high-performance durability; chromoly steel construction with seamless rollers and bushings, and oversized alloy pins for added strength
Moose Racing Brake Caliper Pistons Rear Honda
  • Reduced price / -€1.19
Available
Honda CR 125 1994

Moose Racing Brake Caliper Pistons Rear Honda

MooseRacing
17020174
€18.63 €19.82
BRAKE CALIPER PISTONS: Pistons for replacing the brake caliper Includes required quantities Made by Nissin, the OEM manufacturer in Japan
Electric Regulator 18236
  • Reduced price / -€1.63
Available
Honda CR 125 1994

Electric Regulator 18236

Vicma
18236
€25.62 €27.25
Electric Regulator 18236
Hot Rods Water Pump Rebuild Kit Honda CR 125 1990-04
  • Reduced price / -€4.68
Available
Honda CR 125 1994

Hot Rods Water Pump Rebuild Kit Honda CR 125 1990-04

Hot Rods
09342921/WPK0009
€22.43 €27.12
Hot Rods Water Pump Rebuild Kit Kit includes water pump cover gasket or o-ring, water pump shaft bearing(s) and seal(s) to repair a leaking water pump seam and/or a failed bearing Precision micro bearing provide OE quality and durability High pressure/temperature mechanical rubber seals Does not include clutch cover gasket
Hiflofiltro Foam Air Filter HFF1012
  • Reduced price / -€2.60
Available
Honda CR 125 1994

Hiflofiltro Foam Air Filter HFF1012

Hiflofiltro
HFF1012/10110389
€12.98 €15.58
Dual-Stage Racing Foam Air FiltersCompetition off-road air filters manufactured in the Netherlands using a special dual-layer foam, formulated for maximum filtration and optimum air flow for improved power.Top quality materials and superior construction allow the filter to be used over and over again without any loss of performance.
Shorty Clutch Lever Honda CR
  • Reduced price / -€5.97
Available
Honda CR 125 1994

Shorty Clutch Lever Honda CR

MooseRacing
431101L
€12.79 €18.76
Alloy levers allow 2-finger control of the brake and clutch Complete with two-piece lever holder and adjuster Each assembly is labeled for easy identification Left and right assemblies sold separately
Apico Aluminum Twister Throttle Tube AP-THRALU3
  • Reduced price / -€9.15
Available
Honda CR 125 1994

Apico Aluminum Twister Throttle Tube AP-THRALU3

Apico
AP-THRALU3
€52.02 €61.17
Apico Twister Throttle Tube mxtotal.comSealed ball bearing virtually eliminates frictionFeatures nylon sleeve bearing on inboard endPrecision CNC machined aluminum tubeIncludes a free insert for all Pro Taper barsCrud plug stops grip glue from ruining bearingUsed by many top Pros worldwide
 Blackbird Rim Stickers Honda Black
  • Reduced price / -€8.94
Available
Honda CR 125 1994

Blackbird Rim Stickers Honda Black

Blackbird
5068R/20
€24.33 €33.28
Each kit contains: 8 rim stickers to be applied on the front wheel, 8 for the rear rim and two spare part sticker.The rim stickers for motocross, enduro, motard, and trial bikes are made using extremely high-performance, top-quality materials. The crystall sheet used is 0.5 mm thick, while the adhesive on the sticker has a strong, long-lasting hold.
Athena Fork Oil Seals Kit P40FORK455089 (43 X 55.1 X 9.5/10 mm)
  • Reduced price / -€0.16
Available
Honda CR 125 1994

Athena Fork Oil Seals Kit P40FORK455089 (43 X 55.1 X 9.5/10 mm)

Athena
04070202/P40FORK455089
€21.20 €21.36
Dimensions: 43 X 55.1 X 9.5/10Athena offers the most complete range of fork oil seal kits and dust seal kits.The quality of Athena oil seals meets or exceeds OEM quality. For fitments please use the link below to the Athena fitment site online, and enter your bike details to find the correct part number.  Or you can match up your seals by dimension using...
Athena Fork Oil Seals Kit P40FORK455057 (43 X 55 X 9,5/10 mm)
  • Reduced price / -€1.55
Available
Honda CR 125 1994

Athena Fork Oil Seals Kit P40FORK455057 (43 X 55 X 9,5/10 mm)

Athena
04070219/P40FORK455057
€7.39 €8.94
Dimensions: 43 X 55 X 10mmAthena offers the most complete range of fork oil seal kits and dust seal kits.The quality of Athena oil seals meets or exceeds OEM quality. For fitments please use the link below to the Athena fitment site online, and enter your bike details to find the correct part number.  Or you can match up your seals by dimension using the...
Apico Titane Flexi Brake & Clutch Lever Honda AP-FLEXIHON1TI
  • Reduced price / -€9.08
Available
Honda CR 125 1994

Apico Titane Flexi Brake & Clutch Lever Honda AP-FLEXIHON1TI

Apico
AP-FLEXIHON1TI
€81.68 €90.75
Apico Forged Brake & Clutch Flexi Pivot Lever Set Apico Factory Forged parts are designed, tested and manufactured for the serious competitor.Using years of racing and engineering experience Apico have blended quality designs, superior materials and precision manufacturing processes to create factory racing parts available toeveryone.Flexi Pivot Lever...
Showing 1-96 of 192 item(s)

This site uses cookies
to store information on
your computer. See our
cookie policy for further
details on how to block cookies.